The Coolamon Hotel in the NSW Riverina won the President’s Prize at the 2026 National Trust (NSW) Heritage Awards. Its redevelopment used a palette inspired by traditional country hotels, with mosaic flooring among the finishes in several rooms. It’s an example of how much a floor contributes to the character of an older building. National Trust, 3 September 2026
When part of an existing floor is missing, the challenge is more specific. A replacement has to meet the surviving pattern along its edges. At Melbourne’s Gothic Bank, International Conservation Services documented the surviving geometric mosaic using photographs processed into measured records and rubbings of the original motifs. The team used the rubbings to guide reconstruction of missing areas. International Conservation Services project record
Photograph the whole repeat and each edge
Take a wide photo that shows where the gap sits in the room. Add a straight-on photograph of one complete surviving repeat with a ruler in view. A close-up of a single tile helps with colour and shape, but a complete repeat shows the sequence and where it starts again.
If only a fragment is exposed, photograph it with a ruler and mark on a plan where the floor covering still conceals the pattern. Include any old photos that show the missing border or repeat. Mark lifted or loose sections separately from gaps, and ask your tiler or conservator which pieces can be retained. If you already have a loose tile, photograph both faces and any markings, and share any original tile codes or invoices you have.
If the missing area reaches a border, doorway or corner, photograph that detail separately. Mark those edges on a dimensioned sketch of the patch. A border that turns a corner may need different pieces from one that runs straight along a wall.
Separate the tile dimensions from the layout
Record the size of an individual piece and the overall size of a complete repeat, including the joints. Note which edges of the replacement will touch original tiles and which will meet another finish. Ask your tiler or project designer to check the existing floor levels and the thickness available for the new work. A panel that follows the pattern also has to meet the surrounding floor.
Include photos that show the colour variation across several original pieces. If a loose original piece is already available and your project team can use it as a reference, say so in the brief. Discuss how close the replacement needs to be in colour, finish and pattern, and what references are available to judge the result. On a heritage project, have the project’s heritage adviser confirm which areas can be replaced and how the new work should relate to the original.
Enquire about bespoke mosaic supply
ExoTiles has supplied replacement flooring for a historic building using porcelain hexagons arranged in a custom pattern. If you’re pricing a missing section, send us the project location, approximate patch dimensions, intended use and target timing. Mention your photos and drawings in the enquiry so we can arrange how to receive them. Each project is quoted individually, and you arrange on-site installation with your chosen tiler. See bespoke mosaic options · Request a project quote