null

How to brief a mosaic for a staircase

Posted by ExoTiles on 11th Nov 2026

At Nepean Hospital in Western Sydney, a cast of superheroes stretches along the external stairs of the new clinical building. Artist Vipoo Srivilasa developed the ceramic mosaic, Healer Superheroes of the Blue Mountains, from drawings by local participants. NSW Health Infrastructure announced construction completion on 6 October 2026 and included the mosaics among the building’s artworks. See the artist’s account of the project. Read the NSW Government project update.

A staircase gives people several views of the same artwork. They might first see it from an entry, then lose part of it behind a handrail or see different details from a landing. If you are commissioning a mosaic for a stairwell or stepped wall, give the artist and fabricator enough site information to design for those views.

Photograph the approach and mark the surfaces

Take one photograph from the bottom and one from the top. Add a side view if visitors can see the stair from a courtyard or lobby. On a sketch or elevation, mark where the mosaic starts and stops, including turns, landings, handrail brackets and any signs that will stay in place.

Identify the surfaces in the brief. A wall beside a stair, a vertical riser and the horizontal tread people walk on are different applications. If the artwork extends onto a walking surface, have the project designer and installer confirm the required slip performance and how the mosaic will meet the stair edges before selecting a tile. For exterior work, note which parts are exposed to rain and which are sheltered.

Use the steps to place the important details

Lay the artwork over the measured drawing before approving the design. A face, word or logo may need to move a little to sit clear of a landing edge, fixing point or joint. Print one full-size portion with an important detail and hold it against the intended surface. Look at it from where visitors will actually approach.

For a design that continues around a corner, use one recognisable feature on both sides of the corner drawing. This helps the fabricator and installer see what must line up when the sections meet.

Give your tiler a layout they can follow

Ask the fabricator to show the section numbers and the orientation on the same elevation used to approve the artwork. Agree with the installer on a fixed reference point, such as a landing corner, before the work is laid out. ExoTiles supplies the mosaic in numbered sections for large designs, and you arrange installation with your tiler. Read how ExoTiles produces custom mosaic orders.

If you are planning a stairwell mural or a stepped feature wall, send us the site location, approximate dimensions and intended installation date. Mention any elevations, site photos or artwork in your message so we can arrange how to receive them. Enquire about a custom mosaic.